Automatically and quickly finds correct breaker or fuse. Quickly and easy identifies conditions of circuit socket. MS5902-T× Works on 220V AC, MS5902-TB Works on 110V AC
- Operating temperature
- 0 ~ 50℃
- Operation
- Locating a Circuit Breaker or Fuse
Keep the pillar at left on the MS5902-T Plug the MS5902-T into the receptacle.if there is a candescent light fixture,please install a socket adapter before make sure the switch is OFF.then plug the MS5902-T into the socket adapter,turn the switch on at one time.(Socket adapter need purchase additional) Go to the circuit breaker panel box. Turn the MS5902-R on,the red LED is light. Place the chapiter of the MS5902-R directly onto the circuit breaker or fuse. Slide the chapiter of the MS5902-R down each breaker along both sides of the panel .Then the MS5902-R will beep frequently as it denote the relative signal strength. Move the MS5902-R down each breaker once more. On the third pass, the MS5902-R will beep ,the red LED will quench and the green LED will light only at the circuit Breaker powering the MS5902-T. Push the breaker off and check that the LED on the MS5902-T in the outlet is off to confirm you have found the correct breaker or buse. Test Socket Keep the pillar at right on the MS5902-T. Please contradistinguish nameplate on the MS5902-T.
Maintenance
Keep clean with a dry cloth. When the yellow LED is light on the MS5902-R, please unscrew and remove cover, insert new 9V battery so as to the MS5902-R is well-balanced.
