Ignition sequence
Push the on/off adjuster up to the tip to release the gas, then turn to the middle position. Then move the device away from your face and body and activate it with a flare gun igniter or a regular igniter.
Surroundings
1The temperature of the mouthpiece can be adjusted by opening/closing the regulator. 2 When brazing or brazing, usually adjust the on/off adjuster forward to the middle position.
The soldering iron tip does not need to glow red to reach a satisfactory solder temperature. Experience will determine the required tuning settings.
4 Excessive airflow, bursting or redness of the catalyst may occur. The regular adjustment is poor, which means that it is too high. The four colors are sent out randomly, don't take pictures if you mind!
